Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Summary

This article will describe your laptop to the classroom projector in general classrooms at Boise State.

Instructions

  • Find the HDMI cable at the lectern
    • The HDMI cable is a small, pentagonal cable with no screws
      HDMI cable

  • Plug the cable into your HDMI port

    You may need an HDMI or VGA adapter if your laptop or device does not have either of these ports. When using an adapter, you may also need to plug in an audio cable to your device.

  • Tap anywhere on the screen to wake to Crestron A/V control panel
  • Under "DISPLAY", tap "ON" to turn on the projector
  • Tap "LAPTOP" to display from your laptop. Your laptop should now display on the wall or screen at the front of the room

  • Toggle "AV MUTE" to temporarily turn on or off the projector display

    The "AV MUTE" button flashes when the display is off.

  • No labels